+86 181 3221 2801

Home > Products > Vertical Slurry Pump > Sump Pump >

SP SPR Vertical Slurry Pump

    SP、SPR pumps are verticalcentrifugal slurry pumps that is in liquid to handle abrasivelarge particle and high concentration slurries. It can operate normally without shaft gland and shaft gland water even lack of intake. SP pump body is made from antifriction metalthe impeller is made from antifriction metal or rubber and polyurethane. Submerged parts of the SPR pump coated rubber for transportation corrosive slurry.
inquire Now
  • Outline
  • Meaning of Type


      The SPR and SP designs, manufactured in popular metric sizes, provide a simple, yet rugged range of sump pumps specially developed for:

      -Abrasive and/or corrosive slurries

      -Large particle size

      -High slurry densities

      -Continuous or “snore” operations

      -Heavy duties demanding cantilevered shafts

    SP SPR Submerged Pump

    Performance Data
    Impeller Diameter
    流量Q(m3/h) 扬程H(m) 效率
    40PV-SP(R) 40PV-V(R) 40 1000—2200 17—43.2 4—28.5 40 15 188
    65QV-SP(R) 65QV-V(R) 65 700—1500 18—114 5—31.5 60 30 280
    100RV-SP(R) 100RV-V(R) 100 500—1200 54—289 5—36 62 75 370
    150SV-SP(R) 150SV-V(R) 150 500—1000 108—479 8.5—40 52 110 450
    200SV-SP(R) 200SV-V(R) 200 400—850 189—891 6.5—37 64 110 520
    250TV-SP(R) 250TV-V(R) 250 400—750 261—1089 7—33.5 60 200 575
    300TV-SP(R) 300TV-V(R) 300 350—700 288—1267 6—33 50 200 610

      Design Features

      Bearing Assembly -

      The bearings, shaft and housing are generously proportioned

      to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.

      The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.

      Column Assembly -

      Completely fabricated from mild steel. The SPR model is

      elastomer covered.

      Casing -

      Has a simple bolt-on attachment to the base of the column. It is manufactured

      from a wear resistant alloy for the SP and from moulded elastomer for the SPR.

      Impeller -

      Double suction impellers (top and bottom entry) induce low axial bearing

      loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.

      Upper Strainer -

      Drop-in metal mesh; snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings.

      Lower Strainer -

      Bolted metal or polyurethane for SP; moulded snap-on elastomer

      for SPR.

      Discharge Pipe -

      Metal for SP; elastomer covered for SPR. All wetted metal parts are completely rust protected.

      Submerged Bearings -


      Agitation -

      An external agitator spray connection arrangement can be fitted to the

      pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.

      Materials -

      Pumps can be manufactured in abrasive and corrosive resistant materials.

    yle="width: 600px; height: 400px;" />
  • Tel: +86 181 3221 2801
  • Fax: +86 311 8087 2660
  • E-mail:
  • Add: Yudi Industrial Zone, Luancheng District, Shijiazhuang City, Hebei, China.

Copyright © Shijiazhuang Longteng Machinery Co., Ltd All Rights Reserved